Latest

Raspberry Pi based audio streamer features 5-inch touchscreen

Pinterest LinkedIn Tumblr

 

Raspberry Pi based audio streamer features 5-inch touchscreenOrchard Audio has launched an $800 “PecanPi Streamer Extremely” that provides a 5-inch touchscreen to the Raspberry Pi 3-based audio streamer. Orchard can also be prepping a “PecanPi USB/SPDIF” DAC and amp that overrides your laptop or telephone audio.

Final yr, Orchard Audio discovered success with a well-reviewed PecanPi DAC Raspberry Pi add-on and PecanPi Streamer system primarily based on it. Now, the corporate has returned with a PecanPi Streamer Extremely, a bigger, 195 x 120 x 100mm variant of the Streamer with a 5-inch, 800 x 480-pixel touchscreen. Orchard Audio additionally teased a PecanPi USB/SPDIF (see farther beneath).

Raspberry Pi based audio streamer features 5-inch touchscreen Raspberry Pi based audio streamer features 5-inch touchscreen
PecanPi Streamer Extremely
(click on photos to enlarge)

The Extremely is accessible on pre-order for $799.95, a reduction from the $849.95 retail worth, with shipments “in time for the vacations.” Together with including the touchscreen, the PecanPi Streamer Extremely is redesigned so that each one the Raspberry Pi and DAC ports can be found on the again of the unit. It additionally upgrades to greater high quality RCA parts.

In any other case, the PecanPi Streamer Extremely presents the identical performance because the Streamer, with the identical PecanPi DAC Raspberry Pi add-on card and the identical Raspberry Pi 3B. The usual PecanPi Streamer now sells for $500, up from the sooner $400 pre-order worth. Just like the Streamer and DAC, the PecanPi Streamer Extremely defaults to pre-loaded Volumio software program , with elective Rune Audio, Roon end-point, moOde Audio, and PiCorePlayer.

Raspberry Pi based audio streamer features 5-inch touchscreen Raspberry Pi based audio streamer features 5-inch touchscreen
PecanPi DAC (left) and unique PecanPi Streamer
(click on photos to enlarge)

The PecanPi DAC, which changed Orchard Audio’s earlier ApplePi DAC, now sells for $275, up from $225. As earlier than you possibly can basically construct your individual Streamer by including a la carte equipment together with a quantity management POT (potentiometer) to the DAC and a WiFi/BT outfitted Raspberry Pi.

The PecanPi DAC contained in the Streamer and Extremely options twin TI Burr-Brown PCM1794A PCM1794A DAC chips configured in monaural mode. There may be additionally a Crystek CCHD-575 oscillator, amongst different parts.

The DAC presents as much as 192kHz sampling charges and as much as 24-bit bit charges. With XLR output, the Sign to Noise Ratio (SNR) is 130dB and the Dynamic Vary (DNR) is 125dB. With RCA output, the specs are 127dB SNR and 121dB DNR. (For extra particulars, see our earlier PecanPi DAC and PecanPi Streamer report.)

— ADVERTISEMENT —

Raspberry Pi based audio streamer features 5-inch touchscreen

PecanPi USB/SPDIF

The PecanPi USB/SPDIF will launch over the subsequent month at an undisclosed worth. Geared up with a USB port and digital SPDIF (or S/PDIF) interface, the system is designed to bypass the DAC inside your PC, laptop computer, pill, or telephone to supply greater high quality audio.

Raspberry Pi based audio streamer features 5-inch touchscreen
PecanPi USB/SPDIF
(click on picture to enlarge)

The seems to supply a model of the PecanPi DAC that’s managed by the USB linked system as a peripheral moderately than with a inbuilt Raspberry Pi. The system makes use of an XMOS asynchronous USB interface chip to decode high-resolution knowledge streams “with as much as 24-bit/192kHz decision via its USB connection, so you possibly can get pleasure from better-than-CD audio high quality,” says Orchard Audio.

Additional info

The PecanPi Streamer Extremely is accessible on pre-order for $799.95 for those who use the low cost code “preorder50” at checkout. The retail worth will likely be $849.95. Shipments ought to arrive in late November. The PecanPi USB/SPDIF, in the meantime, ought to go on sale inside the month at an undisclosed worth. Extra info could also be discovered on Orhcard Audio’s PecanPi web page.

1.Just follow the instructions from your touchscreen and make sure everything is well adjusted using spacers and screws. Then put the sound card on top of the …2.Check the dimensions of your sound card's output and its distance from bottom of the touchscreen. With these specifications you can mark the area on the …3.Since the two peripheries, screen and sound card, both need a lot of juice to run properly, we need to give the sound card an additional power source in the …,1.Just follow the instructions from your touchscreen and make sure everything is well adjusted using spacers and screws. Then put the sound card on top of the …,2.Check the dimensions of your sound card's output and its distance from bottom of the touchscreen. With these specifications you can mark the area on the …,3.Since the two peripheries, screen and sound card, both need a lot of juice to run properly, we need to give the sound card an additional power source in the …,hifiberry mit display,max2play case,squeezebox diy,volumio screen plugin,touch display volumio,rasptouch,5 inch display for raspberry pi 4,raspberry pi5,raspberry pi 5 inch screen,hdmi display for raspberry pi,5 inch touch screen display,raspberry pi 5 inch touch screen dimensions,raspberry pi touch screen 15 inch,raspberry pi screen 3.5 inch,raspberry pi screen amazon,raspberry pi touchscreen projects,raspberry pi touch screen 10 inch,raspberry pi touchscreen case,python raspberry pi tutorial pdf,raspberry pi books 2019,raspberry pi projects type pdf,raspberry pi zero documentation pdf,raspberry pi project documentation,raspberry pi pdf viewer